The high speed roll forming machine, also known as a high speed rollformer, is the new type line which is produced both by our company and Formia company from Finland. The complete high speed forming machine adopts cold forming, cold punching, automatic stack, industrial automation controlling system and precision machining technology. Through advanced high speed forming technology, it can run fully automatically, including decoiling, forming, cutting to length and stacking. The highest speed can reach to 60m/min.

Jinggong is a professional roll forming machine manufacturer and supplier of high speed roll converting machine with many years' experience and a lot of successful cases. We have got many positive reviews regarding this roll forming machine. If you want to know more about our high speed roll forming machine, please contact us now!

Main Technical Features Of High Speed Roll Forming Machine

1. Adopt independence guide post supporting wall plate and inside the transmission chain, the rollers are treated with nitriding and polishing.

2. Setup the flat sheet pre-cutting equipment to avoid waste of raw material.

3. Procedure control and encoder measuring the length, it will automatically cut to length.

4. Adopt procedure control stacker which will automatically stack, take count and move out the products.

Technical Flow Of High Speed Roll Forming Machine

Decoiling→feeding the steel sheet→flat sheet cutting→side guiding→add lubrication→roll forming→cut to length→products stacking→move out products.

Panel Drawings Of High Speed Roll Forming Machine

For more information about building materials machinery, please feel free to contact us!

h beam shot blasting machine is designed and manufactured to clean the surface of the section steel. It is ideally suited for removing the rust, scale and contamination from the steel surface, which can make the surface clean, bright but with a certain coarseness. So the paint film can attach to the steel surface more firmly, thus improving surface quality and the anti-corrosion capacity. Our H-beam shot blasting machine mainly consists of shot blasting chamber, workpiece transport system, shots circulation system, dust removing system, electrical control system, etc.

The length of this machine is about 31m; the height is less than 6.4m. The abrasive diameter is from 1.2 ~ 1.5mm, and the conveying speed is about 0.4～4.5m/min (Frequency conversion speed regulation). For the covering area, it takes about 15000×1000×1800mm.

As a famous H-beam shot blasting machine manufacturer in China, we can design and manufacture different specifications according to different requirements of the client.

The components included of this production line:

1). shot blast cleaning chamber system

2). roller conveying system

3). pill material circulation system

4). dust removal system

5) . electrical control system

Technical Specifications of H-beam Shot Blasting Machine

Special Features About H-beam Shot Blasting Machine

Our shot blasting machine is the pretreatment equipment for cleaning welded structures, H steel and shaped steel. It is mainly used to perform the function of shot blasting towards the surface of raw steel material, which can remove rusty scale, welding slag and roll scale on the surface, thus obtaining uniform metal luster. The shot blasting machine can not only improve the finishing quality and corrosion resistance of the steel plate, but also reduce labor intensity and environment pollution.

As a professional sandwich panel machinery company, Jinggong trys our best to provide good products and service for you.

The clamping and alignment of the web plate and flange plate will be done in beam assembly machine, there also have automatic tack-welding. Jinggong h beam assembly machine consists of an alignment system, conveyor rolls, hydraulic and electrical systems, etc. The upper pinch roller adopts two or four groups of rails which will ensure stable assembling and easy operation.

Max. length of H-Beam Assembling Machine can be 15m, and max. speed up to 6m/min. We can design and manufacture different specifications according to the different requirements of the client.

Size of raw materials required for H-Beam Assembling Machine:

Web height: 200-1800 mm

Web thickness:  6-70 mm

Flange width: 200-800 mm

Flange thickness: 6-80 mm

Workpiece length: 4000-15000 mm

Parameters Of H-Beam Assembling Machine

Special features About H-Beam Assembling Machine

Compact structure: main transmission system is put inside of the main machine, which could save space, also is convenient for operation and maintenance.

Main transmission system is composed of one set of motor and retarder, to ensure the synchronization and efficiency by chains and gears' driven work.

This machine is easily operated and simply adjusted.

As a professional sandwich panel machine company, Jinggong trys our best to provide good products and service for you.

Table of Content [Hide]

Uncoiler is special equipment for sheet metal leveling. It is applied to the leveling line of steel plates and uneven plates, which can form uncoiling, leveling, shearing production lines, and other plate product production lines according to related configurations. The uncoiling machine is suitable for industries such as machinery, vehicles, metal products, household appliances, steel structures, and decoration.

uncoiler machine is one of the essential equipment in the welded pipe production line. On the one hand, its function is to support the steel coil by tightening the inner hole of the steel coil; on the other hand, it is to feed the head of the steel strip into the leveling machine through the rotation with the cooperation of the straightening machine. Therefore, the performance of the uncoiling machine is very important to the entire production line. In many years of design practice, we have continuously optimized and improved the structure of the uncoiling machine, which has improved the performance of the uncoiling machine.

The main shaft of the steel uncoiler has two functions, namely, to drive the steel coil to rotate and to support tension of the steel coil. The realization of tightening is usually done by pushing the inclined slider by the oil cylinder or air cylinder installed with the main shaft. Small units use multiple cylinders, and large units use multiple cylinders; the realization of rotation is usually accomplished by the motor driving the main shaft to rotate through a reducer. The oil cylinder or air cylinder installed on the main shaft must rotate together with the main shaft, and the oil cylinder or air cylinder needs to be connected to one end of the working medium pipeline, and the other end of the pipeline is connected to the hydraulic station or solenoid valve.

One of the functions of the uncoiling machine of the unit is to unwind the strip under the tension after maintaining the strip. Another significant function is to realize the automatic centering of the strip under the central control (CPC). The conventional continuous rewinding and color coating unit is equipped with 2 uncoilers. Two uncoilers working alternately creates a prerequisite for the continuous production of the subsequent equipment of the unit.

The uncoiling machine is a welded box-shaped structure, and the variable frequency speed-regulating motor drives the drum shaft to provide the main power for the uncoiling machine after decelerating through the gearbox. The reel of the uncoiling machine is a hollow shaft, which is supported on the gearbox body through two bearings, and a transmission spur gear is installed between the bearings. The gearbox is lubricated by forced lubrication and is equipped with two constant speed motors for the closed-loop oil lubrication system. The mandrel is a cantilever structure, and its front end is supported by an external support bearing during unwinding to maintain the rigidity and stability of the uncoiling machine.

The mandrel of the uncoiling machine is connected to four sector-shaped plates through four sloped dovetail grooves on the end faces. Each sector-shaped plate is prevented from moving in the axial direction through a radial slide at the end but can expand and contract in the radial direction. A rotating oil cylinder is connected to the tail end of the reel shaft, and the piston rod of the oil cylinder drives the front-end quadrangular shaft to slide axially through a pull rod in the center of the reel shaft, thereby driving the sector plate to expand and contract radially. The nominal diameter of the reel can be increased by adding four fan-shaped plates. The frame of the uncoiler can be moved on the guide rail of the uncoiling machine base and driven by a hydraulic cylinder, which can realize the center position control. In order to strengthen the stability of the reel, a support arm device is designed on the head of the reel. When there is a steel coil on the reel, the support arm is driven by the cylinder to support the head of the reel, the support arm usually retracts, and it will not affect the coiling of the steel coil.

As a professional roll forming machine company, Jinggong trys our best to provide good products and service for you.